AUTOMOTIVE

ROTRA MP ID is an EP (Extreme Pressure) gear oil recommended for hypoid gears operating under severe conditions and for very highly loaded gears in general, especially those subject to dynamic loads.
It can also be used in conventional gear-boxes and steering –boxes on cars and trucks, and in gear-boxes, final drives and power take-offs on farm and earth-moving machinery.
It can thus be used for lubricating all gears, whatever they are made of, for which the manufacturer recommend an EP lubricant.

Multitech Plus ID is a multipurpose Universal Tractor Transmission Oil (UTTO) with special properties which make it suitable for use in modern tractor, where
a single system has to satisfy the lubrication requirements of the gearbox, differential,
oil-bath clutches, wet brake, hydraulic systems, final drives and power take-off gearbox, except where the manufacturer specifies oil to API GL-5.
Multitech Plus ID is based on premium base stocks and carefully selected additives and exceeds all industry standard specifications for wet brake oil.
Multitech Plus ID, thanks to its viscosimetrics, can be regarded as a multigrade lubricant and also recommended where a 10W-30 viscosity grade is required.

ROTRA CT ID , available in SAE 10W, SAE 30 and 50 grades, is a special lubricant suitable for use in Caterpillar machines.
ROTRA CT ID is to be used for lubrication of power shift, direct drive transmissions, final drives, differentials, winches, clutch plates, gears and bearings.
Manual transmissions which have had the API CD/CAT TO-2 oil recommendation should now use CAT TO-4 oil.
The viscosity of ROTRA CT ID SAE10W is suitable for the hydraulic system in Caterpillar equipment.
The viscosity of ROTRA CT ID SAE 30 is suitable for ambient temperature range from -15°C to +35°C (from +5°F to +95°F).
The viscosity of ROTRA CT ID SAE 50 is suitable for ambient temperature range from -5°C to +50°C (from +23°F to +122°F).

Multitech Plus ID is a multipurpose Universal Tractor Transmission Oil (UTTO) with special properties which make it suitable for use in modern tractor, where
a single system has to satisfy the lubrication requirements of the gearbox, differential,
oil-bath clutches, wet brake, hydraulic systems, final drives and power take-off gearbox, except where the manufacturer specifies oil to API GL-5.
Multitech Plus ID is based on premium base stocks and carefully selected additives and exceeds all industry standard specifications for wet brake oil.
Multitech Plus ID, thanks to its viscosimetrics, can be regarded as a multigrade lubricant and also recommended where a 10W-30 viscosity grade is required.

-